Repairs to uPVC Windows

uPVC is an excellent option for modern homes. They are easy to maintain, durable and long-lasting. In contrast to aluminium and timber, they do not get rusty or decay.

Regularly cleaning and lubricating UPVC windows and doors is vital. This will prevent unnecessary repair costs and improve energy efficiency.

1. Broken Glass

If the glass in your window has been damaged, it can cause a huge amount of damage to your home, making it extremely dangerous and possibly fatal. You should take the time to ensure that your windows are in good shape.

For single pane windows it can be relatively simple to replace them, and the replacement will usually fit inside the frame of the previous one easily. However If you have double-pane windows that are secured by internal beading it will be more difficult to get rid of the panes that are in place and replace them with new ones. In this situation, it is necessary to purchase plastic spacers in order to aid in fitting the new pane into the window frame.

Wearing eye protection and thick gloves is essential when you are planning to remove the glass yourself. It is also an excellent idea to lay down a drop cloth before you start working on the glass to ensure that any shards fall onto the fabric rather than on the floor where they could be trampled upon and cause further damage.

Once the glass has been removed, it's a good idea to seal the gap with clear packaging tape or duct tape to stop water and drafts from getting into the home until a professional can come out and repair the window repair. This will also act as a barrier, preventing any intruders to gain access into your home. If the distance between the window and the door is significant, you may need to consider security screens that includes an opening. This will provide the best of both.

2. Sagging

uPVC is durable and energy efficient alternative to timber sash window. Over time, they can develop a number of problems that include sliding. A window that isn't properly aligned can cause problems with light, draughts or even security. It's crucial to act as soon as you notice your uPVC windows are sagging.

Repositioning the hinges could aid in fixing a window which is sagging. You'll first need to open the windows to get at the frame. Then, using an screwdriver, unscrew the top and bottom hinges and adjust them by turning them clockwise or Upvc window repairs counter-clockwise. Close your window to test the fit after having moved your hinges. If you are happy with the size of the window, you can tighten screws to hold them in the right position.

If you are unable to move the hinges, you might have to replace the seal. Rubber seals may dry out and lose their elasticity over time, leading them to loosen. If this happens, it's essential to replace the seal as quickly as possible to ensure your uPVC windows remain watertight and draught-proof.

UPVC handles can also loosen. The majority of the time this is due to screws that have come loose over time. However, it can occur because the handle mechanism has been worn out. Fortunately, it's easy to repair the loose uPVC window handle yourself. First, you'll need to shut the window and do a test fitting. The corner joints of the sash should be aligned with the casing joint. If it isn't, you can use a screwdriver or a wrench to loosen the handle and then return the mechanism to its original its original position.

3. Water Leaks

If you're waking up to wet floors and damp walls each time it rains, it is important that you take action. Water leaks through windows can cause structural damage to your home, and affect your ability to regulate the temperature in your home. Most of the time, uPVC window leaks are caused by damaged or missing sealant.

It is a fairly easy fix that can be done by any skilled DIYer. Based on the severity of the issue the caulking that was used up might need to be removed before a fresh layer is applied. It is essential to remember that when it is about uPVC window repairs, you should not be tempted to apply too much caulk in order to make the area harder to clean and decrease the efficiency of your energy usage.

Make sure that the drainage holes have no debris inside them and that the sill pan has been angled correctly to drain away from the window. In more extreme instances, you may need to replace the window.

Other signs of long-term water leakage are sills that are rotten and the appearance of black spots of mold on the walls near the window. This fungus thrives in humid conditions and can propagate quickly throughout the house.

It is also important to note that if the leakage is coming from between the glass of your double-glazed windows it may be more likely to be an issue with the glass seal rather than the frame or sagging. It is also possible to be fixed by an uPVC window expert who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or slack and blow open with ease, it may be the hinges that are at the fault. These are easily repaired by any DIYer who is skilled and can be completed in just a few minutes.

Like any mechanical component hinges are prone to wear out over time. It's very simple to change the hinges on a window however it is simpler if you have someone to help you hold the frame.

It is also important to verify that the uPVC hinges are opening and closed in the correct direction. Check for the arrows on each hinge to determine which way the window should be opened.

The issue could be caused by opening the window improperly or by a poor installation in the factory. It is usually possible to fix the issue by sending us a photograph via our website and we will be pleased to offer you advice.

Regular lubrication of the hinges is essential. Applying a light engineering lubricant on the hinges is a good method to accomplish this. We suggest using a lubricant that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication can allow the window to open and close more easily. It also helps prevent corrosion and reduce the risk of sticking. The ideal time to do this once a year. WD40 and other solvent-based lubricants are not recommended as they can damage your uPVC windows.

5. Draughts

Draughts in windows made of upvc can be caused by various factors. The hinges can also be unbalanced due to wear, which can cause an opening between the frame and sash. This can be easily repaired by giving them good cleaning, but when they're beyond repair, it may be necessary to have them aligned or replaced. Secondly the interlock, this is on the hinge side of the window and can also become misaligned, again it is possible to give them a thorough clean, however in some instances it could be necessary to get them replaced.

The seals may wear out or become damaged over time, allowing air escape. Replacing these with high-quality weatherstripping can help stop draughts. Replace the windows made of Upvc with low-emissivity glass. This will help regulate indoor temperatures and lessen the risk of draughts.

Another method of reducing drafts effectively is to use a Draught-exclusion device. These are usually fabric tubes filled with a filler which can be placed over your window sill. They can help stop cold air from entering and keep your home warm and cozy!

With a bit of regular maintenance and repairs your windows made of upvc will provide an excellent level of security and insulation for your home. It is important to remember that all windows will eventually wear out and it could be more cost-effective to replace them than to repair them. So, if you are experiencing issues with your Upvc windows, it's recommended to seek help from a professional as soon as possible.